How To Assemble An Eye Bolt?

Eye bolt is used for a number of garden and home projects and it permits the users to create an eye bolt anchor in a metal or wood surface. Once its stem is attached to the fixed surface, the eye bolt is used for hooking a cable, chain, rope or wire. They are commonly used for hanging flower baskets in houses and also for hanging swings too. Bolt and nuts manufacturers generally recommend that this product require extra nuts and washers for proper assembling. Now, if you are confused about how to assemble it, the information given below will be helpful:

The initial step to be carried out is to place a nut on the threaded end of the eye bolt and it should be threaded in a clockwise direction, until it sits near the eye. Then, get the appropriate flat washers from the website dealing with the best products from the best fasteners manufacturing company and slide the flat washer over the threads along the stem of the bolt, until it gets close to the previously placed nut. Then, the stem should be slid through the hole in the surface to which eye bolt anchor process is done. The sliding should be done all the way until, the stem comes out of the other side of the wood or metal surface. US bolts

Then, again a flat washer should be slid over the threaded end of the bolt regardless of whether it is cadmium plated bolts or any other for that matter, which should be placed against the metal or wood anchoring surface. Then, as suggested by the bolt and nuts manufacturers, the second nut should be placed over the threaded end and it should be turned into clockwise motion, until it is placed against the flat washer.

Finally, an adjustable wrench should be placed on each of the nuts, which should be turned near the eye in anti-clockwise direction, while the nut near the threaded end should be tuned in clockwise motion. This will tighten the cadmium plated bolts against the surface.

If you are aware of the size of the nuts, you can use box wrenches on them as against adjustable wrenches as suggested by the best fasteners manufacturing company. This is because box wrenches will not strip the nuts like the other alternative.

All it takes is the selection of the best company dealing with these screws and nuts for any future purchases.